Handleiding
Je bekijkt pagina 248 van 795
Conguring the Basic Settings for Sending E-mail (Send
Function Setting Tool)
C0J0-052
From a computer, congure the basic settings of the e-mail server using the Send Function Setting Tool. You can also
register destination e-mail addresses to Favorites in the Address Book.
* Favorites is a list of destinations that can be recalled with [ ] in the Address Book. Address Book
Function(P. 159)
Administrator privileges are required. The machine must be restarted to apply the settings.
If the SMTP port number of the e-mail server is other than 25, you must change the port number setting.
Changing
the Port Number(P. 385)
Required Preparations
● Connect the computer you are using to congure the settings to the machine over a network.
● Prepare the following information and keep it close by.
- IP address of the machine Checking the Network Status and Settings(P. 92)
- E-mail address to register as a destination
- Setting information of the e-mail server (SMTP server name, authentication setting, user name and
password to be used for authentication)
* For details about the setting information, contact your provider or network administrator. Depending on
the usage environment, you can also refer to the information set in the computer e-mail software.
1
From a Web browser on a computer, access the following URL.
http://<IP address of this machine>/sendsupport_login.html
➠ The [Start Settings] screen for the Send Function Setting Tool is displayed.
You can also use the downloaded le to start the Send Function Setting Tool. Using the Downloaded Send
Function Setting Tool(P. 240)
When the [Start Settings] Screen of Send Function Setting Tool Is Not Displayed
When a message such as [Cannot continue the settings because the function to perform settings for the
device is restricted.] is displayed and the [Start Settings] screen is not displayed, see the following:
Cannot Access Remote UI or Send Function Setting Tool(P. 719)
2
Click [Start].
If the login screen appears, enter the Administrator ID and PIN, and then click [Logon].
3
Click [Send to Email Settings].
➠ The [Send to Email Settings] screen is displayed.
Scanning
238
Bekijk gratis de handleiding van Canon imageCLASS MF662Cdw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS MF662Cdw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 74959 MB |
