Handleiding
Je bekijkt pagina 83 van 710
7
Wait a few minutes.
➠ When the machine is connected to the wir
eless LAN, [ ] appears on the [Home] screen and screen of
each function.
By default, an IP address is set automatically
.
To use a specic IP address, set this manually.
Setting IPv4 Addresses(P. 77)
Setting IPv6 Addresses(P. 81)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Press [Close], check the information of the wir
eless LAN router to which you want to connect, and repeat the
procedure starting from Step 2.
5 Lines LCD Model
Required Preparations
● Prepare the information of the wireless LAN router to which you want to connect, and keep it close by.
Wireless LAN Router Information Required for Connection(P. 62)
● When connecting to a wireless LAN r
outer supporting WPA-EAP or WPA2-EAP for the security standard, set
IEEE 802.1X.
Using IEEE 802.1X(P. 358)
1
On the control panel, select [Wireless LAN Set.] in the [Home] screen and press
.
[Home] Screen(P. 121)
➠ The [Select Network] screen is displayed.
● If the login scr
een appears, enter the System Manager ID and PIN, and then select [<Log In>] and press
. Logging In to the Machine(P. 138)
● If the message [Enable the wireless LAN?] appears, select [Y
es] and press
.
● If the message [Cannot nd the access point.] appears, press .
2
Select [Other Connections] and press .
3
Select [Manually Enter Network Name] and press
.
➠ The SSID input screen is displayed.
4
Enter the SSID
, select [<Apply>], and press
.
➠ The [Security Settings] scr
een is displayed.
Setting Up
74
Bekijk gratis de handleiding van Canon imageCLASS MF289dw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS MF289dw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 70127 MB |
