Handleiding
Je bekijkt pagina 74 van 710
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Press [Close], and r
epeat the procedure starting from Step 2.
5 Lines LCD Model
1
On the control panel, select [Wireless LAN Set.] in the [Home] screen and press .
[Home] Screen(P. 121)
➠ The [Select Network] screen is displayed.
● If the login scr
een appears, enter the System Manager ID and PIN, and then select [<Log In>] and press
. Logging In to the Machine(P. 138)
● If the message [Enable the wireless LAN?] appears, select [Y
es] and press
.
● If the message [Cannot nd the access point.] appears, press .
2
Select [Other Connections] and press .
3
Select [WPS Push Button Mode] and press
.
➠ The machine starts searching for an access point.
4
After the sear
ch for an access point starts, press the button on the wireless LAN
router within two minutes.
Depending on the wir
eless LAN router, you may have to press and hold the button.
* For details on how to oper
ate the button, see the manual of your wireless LAN router.
5
When [Connected.] appears on the control panel, wait a few minutes.
➠ When the machine is connected to the wir
eless LAN, [
] appears on the [Home] screen.
By default, an IP address is set automatically
.
To use a specic IP address, set this manually.
Setting IPv4 Addresses(P. 77)
Setting IPv6 Addresses(P. 81)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Select [Close] and press
, and repeat the procedure starting from Step 2.
Setting Up
65
Bekijk gratis de handleiding van Canon imageCLASS MF289dw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS MF289dw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 70127 MB |
