Handleiding
Je bekijkt pagina 193 van 710
Specifying Destinations (TX Job Log)
A19R-03R
You can specify destinations used in the past b
y calling up the TX Job Log. The scan settings used when the destination
was used are also recalled.
When you call up the TX Job Log, the specied destinations and scan settings are overwritten.
● You cannot use the TX Job Log when sending from the log is restricted. Prohibiting the Use of
Destinations in the Send Log(P.
370)
1
On the control panel, press [Scan] or [Fax] in the [Home] screen.
[Home]
Screen(P. 121)
2
When you are scanning, press [E-Mail] or [File].
3
Press [Destination] [Recall Set.].
4
Select the log you want to call up.
➠ The destinations and scan settings of the selected log are applied.
The Scan or Fax scr
een is displayed with the specied destinations entered.
When there are multiple destinations in the log, only the rst destination is displayed, but all of the
destinations are applied.
5
Change the destinations and scan settings, as needed.
You can change and send the called up destinations and scan settings.
● The TX Job Log is cleared in the follo
wing cases:
- When the power is turned OFF
- When entry of new destinations is restricted
Sending Only to Registered Destinations(P. 371)
Basic Operations
184
Bekijk gratis de handleiding van Canon imageCLASS MF289dw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS MF289dw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 70127 MB |
