Handleiding
Je bekijkt pagina 103 van 710
Conguring SNTP
A19R-020
To obtain time information fr
om the time server on the network, congure Simple Network Time Protocol (SNTP).
When SNTP is congured, the time server is checked at specied intervals to adjust the time and maintain the correct
time on the machine.
The machine supports both an NTP server (NTPv3) and SNTP server (SNTPv3 and v4).
Congure these settings using Remote UI from a computer. You cannot use the control panel to congure the
settings.
Administrator privileges are required.
Required Preparations
● The time is adjusted based on the UT
C (Coor
dinated Universal Time), so specify the time zone setting.
Setting the Date and Time(P. 393)
● Prepar
e the IP address of the NTP or SNTP server and keep it close by.
1
Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 395)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 397
)
3
Click [Network Settings]
[SNTP Settings] [Edit].
➠ The [Edit SNTP Settings] screen is displayed.
4
Select the [Use SNTP] checkbo
x.
5
In [NTP Server Name], enter the IP address of the NTP/SNTP server.
When using a DNS server, you can enter the host name or FQDN instead of the IP address.
Input example:
ntp.e
xample.com
6
In [Polling Interval], enter the interval at which to check the server and adjust the
time.
7
Click [OK].
➠ The settings ar
e applied.
8
Log out fr
om Remote UI.
Setting Up
94
Bekijk gratis de handleiding van Canon imageCLASS MF289dw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS MF289dw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 70127 MB |
