Canon imageCLASS LBP674Cdw II Handleiding (548 Pagina's)

Handleiding

/ 548

Je bekijkt pagina 83 van 548

Conguring SNTP

AU3J-01U

To obtain time information from the time server on the network, congure Simple Network Time Protocol (SNTP).

When SNTP is congured, the time server is checked at specied intervals to adjust the time and maintain the correct

time on the machine.

The machine supports both an NTP server (NTPv3) and SNTP server (SNTPv3 and v4).

Congure these settings using Remote UI from a computer. You cannot use the control panel to congure the

settings.

Administrator privileges are required. The machine must be restarted to apply the settings.

Required Preparations

● The time is adjusted based on the UTC (Coordinated Universal Time), so specify the time zone setting.

Setting the Date and Time(P. 277)

● Prepare the IP address of the NTP or SNTP server and keep it close by.

1

Log in to Remote UI in Administrator Mode. Starting Remote UI(P. 279)

2

On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of

Remote UI(P. 282)

3

Click [Network Settings] [SNTP Settings] [Edit].

➠

The [Edit SNTP Settings] screen is displayed.

4

Select the [Use SNTP] checkbox.

5

In [NTP Server Name], enter the IP address of the NTP/SNTP server.

When using a DNS server, you can enter the host name or FQDN instead of the IP address.

Input example:

ntp.example.com

6

In [Polling Interval], enter the interval at which to check the server and adjust the

time.

7

Click [OK].

8

Restart the machine. Restarting the Machine(P. 90)

➠ The settings are applied.

Setting Up

75

/ 548

Bekijk gratis de handleiding van Canon imageCLASS LBP674Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.