Canon imageCLASS LBP674Cdw II Handleiding (548 Pagina's)

Handleiding

/ 548

Je bekijkt pagina 67 van 548

Connecting to a Wireless LAN by Setting the Details

(Manual Setup Method)

AU3J-01C

You can connect to a wireless LAN router by manually entering all information of the router such as the SSID, network

key, and security settings.

Administrator privileges are required to connect to a wireless LAN.

Required Preparations

● Prepare the information of the wireless LAN router to which you want to connect, and keep it close by.

Wireless LAN Router Information Required for Connection(P. 53)

● When connecting to a wireless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, set

IEEE 802.1X.

Using IEEE 802.1X(P. 238)

1

On the control panel, press [Wi-Fi Settings] in the [Home] screen. [Home]

Screen(P. 98)

➠

The [Select Network] screen is displayed.

● If the login screen appears, enter the Administrator ID and PIN, and then press [Log In]. Administrator ID

and PIN(P. 10)

● If the message [Do you want to enable Wi-Fi?] appears, press [Yes].

● If the message [Could not nd the access point.] appears, press [Close].

2

Press [Other Connections].

3

Press [Manually Enter Network Name (SSID)].

➠

The SSID input screen is displayed.

4

Enter the SSID, and press [Apply].

➠ The [Security Settings] screen is displayed.

5

Select the security standard, and set the authentication and encryption.

When Using WPA-PSK, WPA2-PSK, or WPA3-SAE

1

Select [WPA/WPA2-PSK], [WPA2-PSK/WPA3-SAE], or [WPA3-SAE] to match the security settings of the

wireless LAN router.

2

Enter the network key, and press [Apply].

When Using WPA-EAP or WPA2-EAP

Press [WPA/WPA2-EAP] [OK].

Setting Up

59

/ 548

Bekijk gratis de handleiding van Canon imageCLASS LBP674Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.