Canon imageCLASS LBP674Cdw II Handleiding (548 Pagina's)

Handleiding

/ 548

Je bekijkt pagina 56 van 548

Setting Up the Network

AU3J-014

To operate the machine from a computer or to connect to a server, you must connect the machine to a network.

Use the procedure below to connect the machine to a network and congure the settings of the machine according to

the network environment.

Administrator privileges are required to set up the network.

Depending on the model, the Administrator ID and Administrator PIN may be set by default. Administrator ID and

PIN(P. 10)

● Connecting the machine to a network without proper security measures may leak information from the

machine to third parties. Protecting the Network(P. 225)

◼

Preparing to Set Up the Network

● Provide an Ethernet cable and router according to the usage environment of the machine.

● Check the information of the network environment used by the machine and the required network settings. For

details, contact the network administrator.

● Check that the computer and router to be used in the network are properly connected, and complete the network

settings. For details on the connection method, see the manuals of the devices or contact the manufacturer.

◼

Network Settings Procedure

Step 1

Select whether to use wired or wireless LAN and connect to the network.

To connect to a Wired LAN

Selecting Wired or Wireless LAN(P. 50)

Connecting to a Wired LAN(P. 51)

To connect to a Wireless LAN

Selecting Wired or Wireless LAN(P. 50)

Connecting to a Wireless LAN(P. 52)

Step 2

Set the IP address.

● By default, when the machine connects to a wired or wireless LAN, an IP address is obtained

automatically and set to the machine.

● To use a speciﬁc IP address, set this manually.

Setting IPv4 Addresses(P. 61)

Setting IPv6 Addresses(P. 63)

* When setting an IP address manually, you cannot use the control panel to congure some

IPv6 address settings. It is recommended to use the control panel to set the IPv4 address, and

then use Remote UI to set the IPv6 address.

Setting Up

48

/ 548

Bekijk gratis de handleiding van Canon imageCLASS LBP674Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.