Canon imageCLASS LBP674Cdw II Handleiding (548 Pagina's)

Handleiding

/ 548

Je bekijkt pagina 51 van 548

Conguring the Default Settings (Setup Guide)

AU3J-012

When you turn ON the machine for the rst time, the screen (Setup Guide) for setting the items required for using the

machine is displayed. Congure the settings using the procedure below by following the instructions on the screen.

Step 1: Setting the Display Language and Country or Region(P. 43)

Step 2: Setting the Date and Time(P. 43)

Step 3: Setting Remote UI(P. 44)

Step 4: Connecting the Machine to a Network or Computer(P. 44)

Step 5: Installing the Driver and Conguring the Initial Settings Using Remote UI(P. 45)

● These settings can only be congured one time using the Setup Guide when starting the machine for the

rst time. To change the settings congured with the Setup Guide at a later time, set the items in Steps 1 to

4 individually. For the details of each setting, see the following.

Setting the Date and Time(P. 277)

Setting the ID and PIN for the Administrator(P. 213)

Setting the Password to Use for Remote UI(P. 263)

Setting Up the Network(P. 48)

Step 1: Setting the Display Language and Country or Region

Set the language displayed on the control panel screen and reports to be printed. Next, set the country or region

where the machine is used.

1

On the [Language] screen, select the display language.

2

Press [Yes].

➠

The display language is set, and the [Select Country/Region] screen is displayed.

Depending on the country or region, the [Select Country/Region] screen is not displayed and the [Time

Zone] screen is displayed. When the [Time Zone] screen is displayed, proceed to "Step 2: Setting the Date

and Time." Step 2: Setting the Date and Time(P. 43)

3

On the [Select Country/Region] screen, select the country or region.

➠ The country or region is set, and the [Time Zone] screen is displayed.

Step 2: Setting the Date and Time

The date and time are used as the reference for the functions using date and time information, and therefore, they

need to be set accurately.

1

On the [Time Zone] screen, select your time zone.

Set the time zone (UTC

*1

) and Daylight Saving Time according to the region where this machine is installed.

Setting Up

43

/ 548

Bekijk gratis de handleiding van Canon imageCLASS LBP674Cdw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.