Handleiding
Je bekijkt pagina 64 van 542
➠ The [Auto Acquire] screen is displayed.
2
Congure the Auto Acquire setting, as needed.
[Select Protocol]
Normally, set to [DHCP]. However, when [DHCP] is set in an environment where DHCP cannot be used,
the machine will continue to conrm Auto Acquire in the network, creating unnecessary communication.
When not using DHCP, set this to [Off].
[Auto IP]
Normally, set to [On]. Although priority is given to the IP address allocated with DHCP, if there is no
response from DHCP, Auto IP will be used.
3
Select [<Apply>] and press .
4
Restart the machine. Restarting the Machine(P. 84)
➠ The settings are applied.
Perform a connection test to check whether the IPv4 address is correctly congured. Checking the
Network Status and Settings(P. 73)
Checking the Currently Set IP Address
● On the screen in Step 3, select [Check Settings] and press
to check the current IP address setting. If the
IP address is displayed as "0.0.0.0," it is not correctly congured.
If the IP Address Is Changed after Installing the Printer Driver
● In Windows, you must add a new port. Conguring a Printer Port (Windows)(P. 135)
If you do not know which port is being used, see the following:
Viewing the Printer Port(P. 517)
● In macOS, you must re-register the machine on the Mac. For details about registering the machine, see the
manual of the driver at the online manual site.
https://oip.manual.canon/
* If you are using DHCP to automatically obtain the IP address of the machine, the IP address may be changed
automatically.
Setting Up
56
Bekijk gratis de handleiding van Canon imageCLASS LBP647Cdw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS LBP647Cdw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 49330 MB |
