Handleiding
Je bekijkt pagina 150 van 542
Preparing to Receive and Print I-Faxes
C0JU-03C
Congure the information of the e-mail server to use for receiving and printing data by I-Fax (Internet Fax). You can
also congure APOP authentication and encryption communication settings.
This section describes how to congure the settings using Remote UI from a computer. You cannot use the control
panel to congure the settings.
Administrator privileges are required. The machine must be restarted to apply the settings.
If the port number of the e-mail server (POP3 server) is other than 110, you must change the port number setting.
Changing the Port Number(P. 213)
Required Preparations
● Connect the computer you are using to congure the settings to the machine over a network.
● Prepare the following information and keep it close by.
- IP address of the machine Checking the Network Status and Settings(P. 73)
- Setting information of the e-mail server (POP3 server name, user name, and password to be used for
authentication, encrypted communication setting)
* For details about the setting information, contact your provider or network administrator. Depending on
the usage environment, you can also refer to the information set in the computer e-mail software.
1
Log in to Remote UI in Administrator Mode. Starting Remote UI(P. 264)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 267)
3
Click [Network Settings] [Email Settings] [Edit].
➠
The [Email Settings] screen is displayed.
4
Enter the basic settings of the e-mail server.
[POP Server]
Enter the POP3 server name (the host name or IP address) using single-byte alphanumeric characters.
Input example: Host name
pop.example.com
[User Name]
Enter the user name used for authenticating the POP3 server using single-byte alphanumeric characters.
[Set/Change Password]
To set a password to use when authenticating the POP3 server, select this checkbox, and enter the
password using single-byte alphanumeric characters.
[POP RX]
Select this checkbox.
[POP Interval]
Enter the interval at which to connect automatically to the POP3 server to receive I-Faxes.
To not receive I-Faxes automatically, enter [0]. In this case, I-Faxes must be manually received.
Printing
142
Bekijk gratis de handleiding van Canon imageCLASS LBP647Cdw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS LBP647Cdw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 49330 MB |
