Handleiding
Je bekijkt pagina 79 van 542
Conguring SLP Communication
C0JU-01R
When using the machine in an environment using a Service Location Protocol (SLP) with software installed to perform
communication, congure the SLP communication settings, as needed.
* See the manual of the software to determine the settings that need to be congured.
Congure these settings using Remote UI from a computer. You cannot use the control panel to congure the
settings.
Administrator privileges are required. The machine must be restarted to apply the settings.
Required Preparations
● Prepare the port number used for SLP communication with the software and keep it close by.
● Check the number of routers the SLP communication packets will traverse.
1
Log in to Remote UI in Administrator Mode. Starting Remote UI(P. 264)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 267)
3
Click [Network Settings] [Multicast Discovery Settings] [Edit].
➠
The [Edit Multicast Discovery Settings] screen is displayed.
4
Select the [Respond to Discovery] checkbox, enter the scope name, and click [OK].
For the scope name, enter the name of the scope to which the machine belongs using single-byte
alphanumeric characters.
5
Click [Network Settings] [Sleep Mode Notication Settings] [Edit].
➠ The [Edit Sleep Mode Notication Settings] screen is displayed.
6
Select the [Notify] checkbox.
A notication of the power status of the machine is sent to the software. This helps reduce unneeded
communication during sleep mode and power consumption.
7
Conguring Sleep Mode Notications
[Port Number]
Enter the port number used for SLP communication with the software.
[Number of Routers to Traverse]
Enter the maximum number of routers that SLP communication packets can traverse.
[Notication Interval]
Enter the interval at which notications are sent about the power status of the machine.
Setting Up
71
Bekijk gratis de handleiding van Canon imageCLASS LBP646Cdw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS LBP646Cdw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 49330 MB |
