Handleiding
Je bekijkt pagina 63 van 542
Setting IPv4 Addresses
C0JU-019
The machine's IPv4 address can either be assigned automatically using DHCP or entered manually.
By default, the IPv4 address is set automatically when connected to a wired or wireless LAN, but you can set it or
change it manually according to your usage environment and purpose.
This section describes how to congure the settings using the control panel.
You can also set the IPv4 address using Remote UI from a computer after it has been set on the machine. Managing
the Machine from a Computer (Remote UI)(P. 263)
Administrator privileges are required. The machine must be restarted to apply the settings.
1
On the control panel, select [Menu] in the [Home] screen, and press . [Home]
Screen(P. 91)
2
Press [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings]
[IP Address Settings] .
If the login screen appears, enter the Administrator ID and PIN, and then press . Administrator ID
and PIN(P. 4)
3
Set the IP address.
When Manually Setting the IP Address
1
Select [Auto Acquire] and press .
➠ The [Auto Acquire] screen is displayed.
2
Press [Select Protocol] [Off] .
3
Press [Auto IP] [Off] .
4
Select [<Apply>] and press .
➠ The [IP Address Settings] screen is displayed.
5
Select [Manually Acquire] and press .
➠ The IP address input screen is displayed.
6
Enter the IP address and press .
7
Enter the subnet mask and press .
8
Enter the gateway address and press .
When Assigning an IP Address Automatically
1
Select [Auto Acquire] and press .
Setting Up
55
Bekijk gratis de handleiding van Canon imageCLASS LBP646Cdw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS LBP646Cdw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 49330 MB |
