Handleiding
Je bekijkt pagina 61 van 542
Connecting to a Wireless LAN by Setting the Details
(Manual Setup Method)
C0JU-018
You can connect to a wireless LAN router by manually entering all information of the router such as the SSID, network
key, and security settings.
Administrator privileges are required to connect to a wireless LAN.
Required Preparations
● Prepare the information of the wireless LAN router to which you want to connect, and keep it close by.
Wireless LAN Router Information Required for Connection(P. 47)
● When connecting to a wireless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, set
IEEE 802.1X.
Using IEEE 802.1X(P. 222)
1
On the control panel, select [Wi-Fi Settings] in the [Home] screenand press .
[Home] Screen(P. 91)
➠
The [Select Network] screen is displayed.
● If the login screen appears, enter the Administrator ID and PIN, and then press . Administrator ID
and PIN(P. 4)
● If the message [Do you want to enable Wi-Fi?] appears, select [Yes] and press .
● If the message [Cannot nd the access point.] appears, select [Close] and press .
2
Select [Other Connections] and press .
3
Select [Manually Enter Network Name] and press .
➠
The SSID input screen is displayed.
4
Enter the SSID, select [<Apply>], and press .
➠ The [Security Settings] screen is displayed.
5
Select the security standard, and set the authentication and encryption.
When Using WPA-PSK, WPA2-PSK, or WPA3-SAE
1
Select [WPA/WPA2-PSK], [WPA2-PSK/WPA3-SAE], or [WPA3-SAE] to match the security settings of the
wireless LAN router and press .
2
Enter the network key, select [<Apply>], and press .
Setting Up
53
Bekijk gratis de handleiding van Canon imageCLASS LBP646Cdw, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS LBP646Cdw |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 49330 MB |
