Handleiding
Je bekijkt pagina 80 van 604
Setting IPv4 Addresses
AW0W-01F
The machine's IPv4 address can either be assigned automatically using DHCP or entered manually.
By default, the IPv4 address is set automatically when connected to a wired or wireless LAN, but you can set it or
change it manually according to your usage environment and purpose.
This section describes how to congure the settings using the control panel.
You can also set the IPv4 address using Remote UI from a computer after it has been set on the machine. Managing
the Machine from a Computer (Remote UI)(P. 315)
Administrator privileges are required. The machine must be restarted to apply the settings.
Touch Panel Model(P. 72)
Black and White LCD Model(P. 73)
Touch Panel Model
1
On the control panel, press [Menu] in the [Home] screen. [Home] Screen(P. 114)
2
Press [Preferences] [Network] [TCP/IP Settings] [IPv4 Settings] [IP Address
Settings].
If the login screen appears, enter the Administrator ID and PIN, and then press [Log In]. Administrator ID
and PIN(P. 10)
3
Set the IP address.
When Manually Setting the IP Address
1
Press [Auto Acquire].
➠ The [IP Address Settings (Auto Acquire)] screen is displayed.
2
Set [Auto Acquire] to [Off], and press [Apply] [OK].
➠ The [IP Address Settings] screen is displayed.
3
Press [Manually Acquire].
➠ The IP address input screen is displayed.
4
Enter the IP address, subnet mask, and gateway address, and press [Apply].
Setting Up
72
Bekijk gratis de handleiding van Canon imageCLASS LBP246dw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS LBP246dw II |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 55888 MB |
