Handleiding
Je bekijkt pagina 79 van 604
2
Select [Other Connections] and press .
3
Select [Manually Enter Network Name] and press .
➠ The SSID input screen is displayed.
4
Enter the SSID, select [<Apply>], and press .
➠ The [Security Settings] screen is displayed.
5
Select the security standard, and set the authentication and encryption.
When Using WPA-PSK, WPA2-PSK, or WPA3-SAE
1
Select [WPA/WPA2-PSK], [WPA2-PSK/WPA3-SAE], or [WPA3-SAE] to match the security settings of the
wireless LAN router and press .
2
Enter the network key, select [<Apply>], and press .
When Using WPA-EAP or WPA2-EAP
Select [WPA/WPA2-EAP] and press .
When Not Using a Security Standard
Select [None] and press .
6
Select [Yes] and press .
7
When [Connected.] is displayed on the control panel, press .
➠
When the machine is connected to the wireless LAN, [ ] appears on the [Home] screen.
8
Wait a few minutes.
➠ By default, an IP address is set automatically.
To use a specic IP address, set this manually.
Setting IPv4 Addresses(P. 72)
Setting IPv6 Addresses(P. 76)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Press
, check the information of the wireless LAN router to which you want to connect, and repeat the
procedure starting from Step 2.
Setting Up
71
Bekijk gratis de handleiding van Canon imageCLASS LBP246dw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS LBP246dw II |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 55888 MB |
