Canon imageCLASS LBP246dw II handleiding

604 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 78 van 604
When Using WPA-PSK, WPA2-PSK, or WPA3-SAE
1
Select [WPA/WPA2-PSK], [WPA2-PSK/WPA3-SAE], or [WPA3-SAE] to match the security settings of the
wireless LAN router.
2
Enter the network key, and press [Apply].
When Using WPA-EAP or WPA2-EAP
Press [WPA/WPA2-EAP]
[OK].
When Not Using a Security Standard
Press [None].
6
When [Connected.] is displayed on the control panel, press [Close].
When the machine is connected to the wireless LAN, [ ] appears on the [Home] screen and screen of
each function.
7
Wait a few minutes.
By default, an IP address is set automatically.
To use a specic IP address, set this manually.
Setting IPv4 Addresses(P. 72)
Setting IPv6 Addresses(P. 76)
If an Error Message Appears during Operation and a Connection Cannot Be Established
Press [Close], check the information of the wireless LAN router to which you want to connect, and repeat the
procedure starting from Step 2.
Black and White LCD Model
Required Preparations
Prepare the information of the wireless LAN router to which you want to connect, and keep it close by.
Wireless LAN Router Information Required for Connection(P. 60)
When connecting to a wireless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, set
IEEE 802.1X.
Using IEEE 802.1X(P. 273)
1
On the control panel, select [Wi-Fi Settings] in the [Home] screenand press .
[Home] Screen(P. 114)
The [Select Network] screen is displayed.
If the login screen appears, enter the Administrator ID and PIN, and then press
. Administrator ID
and PIN(P. 10)
If the message [Do you want to enable Wi-Fi?] appears, select [Yes] and press
.
If the message [Cannot nd the access point.] appears, select [Close] and press .
Setting Up
70

Bekijk gratis de handleiding van Canon imageCLASS LBP246dw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCanon
ModelimageCLASS LBP246dw II
CategoriePrinter
TaalNederlands
Grootte55888 MB