Handleiding
Je bekijkt pagina 70 van 604
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Press [Close], and repeat the procedure starting from Step 2.
Black and White LCD Model
1
On the control panel, select [Wi-Fi Settings] in the [Home] screen and press .
[Home] Screen(P. 114)
➠
The [Select Network] screen is displayed.
● If the login screen appears, enter the Administrator ID and PIN, and then press . Administrator ID
and PIN(P. 10)
● If the message [Do you want to enable Wi-Fi?] appears, select [Yes] and press .
● If the message [Cannot nd the access point.] appears, press .
2
Select [Other Connections] and press .
3
Select [WPS Push Button Mode] and press .
➠
The machine starts searching for an access point.
4
After the search for an access point starts, press the button on the wireless LAN
router within two minutes.
Press the button within two minutes. (Depending on the wireless LAN router, you may have to press and hold
the button.)
* For details on how to operate the button, see the manual of your wireless LAN router.
5
When [Connected.] appears on the control panel, press .
➠ When the machine is connected to the wireless LAN, [ ] appears on the [Home] screen.
6
Wait a few minutes.
➠ By default, an IP address is set automatically.
To use a specic IP address, set this manually.
Setting IPv4 Addresses(P. 72)
Setting IPv6 Addresses(P. 76)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Press
, and repeat the procedure starting from Step 2.
Setting Up
62
Bekijk gratis de handleiding van Canon imageCLASS LBP246dw II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageCLASS LBP246dw II |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 55888 MB |
