Candy GD 4108-80 handleiding
Handleiding
Je bekijkt pagina 29 van 34
29
10
-
Troubleshooting
EN
10-Troubleshooting
Many occuring problems could be solved by yourself without specific expertise. In case of
a problem please check all shown possibilities and follow below Instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
Electrical equipment should be serviced only by qualified electrical experts, because
improper repairs can cause considerable consequential damages.
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
10.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
The remaining wash cycle time will be 1 hour and 25 minutes.
The remaining delay time will be 6 hours and 30 minutes.
Function child lock is activated.
10.2 Troubleshooting with display code
Problem Cause Solution
CLR FLTR
• Drainage error, water is not fully
drained within 6 minutes.
• Clean pump filter
• Check drain hose installation.
E2
• Lock error.
• Shut the door properly.
E4
• Water level not reached, drain
hose is self-syphoning.
• Make sure that tap is fully opened and
water pressure is normal.
• Check the inlet hose installation.
E8
• Water protective level error.
• Contact the After sales service.
Door is closed because of high water level,high water temperature or spinning cycle.
The washing cycle is finished.The appliance shuts off automatically.
Bekijk gratis de handleiding van Candy GD 4108-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Candy |
| Model | GD 4108-80 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4790 MB |
