Candy CP 6E51LW-80 handleiding
Handleiding
Je bekijkt pagina 26 van 34
Daily use
1. Press the ON/OFF button to turn the dishwasher on.
3. Press to start the programme.
Start a Programme
Set a start time by the following procedure in order to delay a programme start:
1.Set a programme.
2.Press the Start Delay button to seclect the required delay time.(3/6/9hrs).
3.Press the START/PAUSE button and close the door.
4.Countdown begins: 6 hrs < countdown time -------LED 9h light(L11)
Start a Programme with Delay
Pause and restart a wash programme
1. Press to pause the programme and open the door carefully. The current
washing programme indicator and running stage indicator will flash while the
dishwasher is paused.
NOTICE
There is a risk of being sprayed with hot water,do not fully open the door until
the spray arms have stopped rotating.
2.Load, remove, or rearrange any dishes if needed.
3.After closing the door, press button to continue the program. Otherwise, the
program will not run
2. Press to select the program you want on the dishwasher control panel.
4.If you want to reselect the program.Press and hold for 3s.Clear all select
option and delay setting,then back to selection(Avaliable with door open and closed)
3 hrs < countdown time < 6 hrs -------LED 6h light(L10)
3 hrs > countdown time -------LED 3h light(L9)
countdown is completed, the program starts and
the light goes out
1. Press the button for 3s, the start delay is cancelled.
2. Start a new programme and a delayed start if desired.
Cancel Start Delay / Programme
24
Bekijk gratis de handleiding van Candy CP 6E51LW-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Candy |
| Model | CP 6E51LW-80 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 2819 MB |
