Candy CP 6E51LW-80 handleiding
Handleiding
Je bekijkt pagina 18 van 34
16
As soon as the low salt indicator is lit on the control panel ,salt should be topped
up.Always refill with special salt immediately before switching on the appliance.This
ensures that overrun special salt solution is immediately washed out and does not
corrode the rinsing tank.
Using special salt
Top up the salt as follows:
Water softening system
Only use dishwasher salt. Other products can cause damage to the appliance!
Any spilled salt causes corrosion.Run a programme after each refill.
CAUTION
Add about 300g special salt to the water softener, add once, can be used many times
(Note: the first time to use the dishwasher, first add about 300g special salt to the water
softener, and then add 300ml water; When the salt shortage indicator lights up again,
only special salt is added, no water is needed). The consumption of special salt depends
on the water hardness (the higher the water hardness, the greater the consumption).
If the special salt indicator light is still not extinguished after salt is added, it may be
related to the amount of salt added and the temperature of the water, and will be
automatically extinguished after the salt is fully melted.
1.Turn the cap counter-clockwise to open the salt container.
2.Add 300 grams of salt to the water softener.
3.Add 300ml water (add water for first use only).
4.Turn the cap clockwise to close the salt container.
Bekijk gratis de handleiding van Candy CP 6E51LW-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Candy |
| Model | CP 6E51LW-80 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 2819 MB |
