Handleiding
Je bekijkt pagina 32 van 343
30
The induction hob or a
cooking zone has turned
itself off unexpectedly, a
tone sounds and an error
code is displayed (typically
alternating with one or two
digits in the cooking timer
display).
Technicalfault.
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
After connectingthe power
and pressing the “power”
key, there is no response
from the appliance.
Is there a power supply failure?
Wait for the power supply to be resumed
Is the fuse blown or circuit
breaker tripped?
Check the root causes carefully. If the problem
cannot be fixed, please contact our Service Centre
for inspection and repair.
Is the plug connected firmly?
Heating is interrupted
duringnormal use anda
“Beep” is heard.
Incompatible cookware or no
cookware used?
Replace cookware; use cookware suitable for the
induction cooker.
The cookware is not placed on
the center of the heating zone.
Place the cookware on the center of the indicated
heating zone.
Is the cookware being heated
but it is continually being
removed?
Place the cookware inside the heating zone.
Nooperation duringthe
heating being in use
Is the cookware empty or the
temperature too high?
Please check whether the appliance is being
misused
Is the air intake/exhaust vent
cloggedorhas dirt accumulated
on it?
Unclog the air intake/exhaust vent. Wait for the
appliance to cool down, then switch it on again.
Is the cooker working over 2
hours without any interaction?
Reset cooking modes or use the timer function
If the above remedies/controls cannot fix the problem, unplug the appliance
immediately, and contact the Service Centre for inspection and repair. Note the error
code and report it to the Service Centre Ltd. To avoid any danger and damage to the
appliance, do not disassemble or repair it by yourself.
FAILURE DISPLAY AND INSPECTION
Error code
Possible cause
What to do
U
No pan
Please put suitable pot on the heating zone. If it is still
unworkable, please contact the service center.
E1
Abnormal supply voltage( lower than
160V).
Please inspect whether power supply is normal. Power on
after the power supply is normal.
E2
Abnormal supply voltage( higher than
280V).
Please inspect whether power supply is normal. Power on
after the power supply is normal.
E3/E5/E7
Induction coil temperature sensor
failure
Please contact the service center.
E4/E6
IGBT temperature sensor failure
Please contact the service center.
Er
Communication between main board
Please contact the service center.
Bekijk gratis de handleiding van Candy CIH614CF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Candy |
| Model | CIH614CF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 44427 MB |
