Handleiding
Je bekijkt pagina 9 van 261
Using the Timer
You can use the timer in two different ways:
x You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
x You can use it as cut-off timer to turn one or more cooking zones off after time is up.
x You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. And zone selection key is not activated (zone
indication ‘-‘ is not blinking).
Note: you can set minute minder before or after cooking zone power setting finished.
2. Touch timer key, “00” will show in the timer display
and “0” will blink.
3. Set the time for between 1 to 99 minutes by touching
the”-” or” +” control of the timer (e.g. 5)
4. Press the “+” once increases the time by one minute, Press the “-” once decrease the
time by one minute. When the set time exceed 99 minutes, it will automatically
return to “00”, if the “-” and “+” keys are pressed simultaneously, the indicator will
display “00”.
5. When the time is set, it will begin to count down immediately. The display will
show the remaining time.
6. Buzzer will bips for 30 seconds and the timer indicator shows“-- “ when the setting
time finished.
Timer Cancellation
After setting the time again, hold down the “Timer” key for 5 seconds, this will cancel
the timer and the indicator will revert to “00”.
Using the timer to switch off one or more cooking zones
1. Touching the heating zone selection control that you want
to set the timer for.
2. Touch timer control, the “00” will show in the timer
display. and the “0” fiashes.
3. Set the time for between 1 to 99 minutes by touching
the”-” or” +” control of the timer (e.g. 5)
4. Press the “+” once increases the time by one minute, Press the “-” once decrease the
time by one minute. When the set time exceed 99 minutes, it will automatically
return to “00”, if the “-” and “+” keys are pressed simultaneously, the indicator will
display “00”.
5. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
NOTE: There will be a red dot in the right bottom corner of power level indication
which indicating that zone is selected.
6. When cooking timer expires, the corresponding cooking
zone will switch off automatically.
Note: Other cooking zones will keep operating if they are turned on previously.
If the timer is set on more than one zone:
1. When you set timer for several cooking zones, red dots of the relevant cooking
zones are indicated. The timer display shows the min. timer. The dot of the
corresponding zone blinks.
(set to 15 minutes)
(set to 45 minutes)
2. Once the countdown timer expires, the corresponding zone will switch off. Then it
will show the new min. timer and the dot of corresponding zone will flash.
Note: Touch the heating zone selection control, the corresponding timer will be shown
in the timer indicator.
8
Bekijk gratis de handleiding van Candy CI642CBB/1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Candy |
| Model | CI642CBB/1 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 54341 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Touch |
| Kleur van het product | Zwart |
| Timer | Ja |
| Gewicht | 11000 g |
