Handleiding
Je bekijkt pagina 15 van 364
14
The hob is preset to be connected to a 32Amp supply; When four zones are selected at
the same time the hob will limit the maximum power consumed so that the 7.2kW
power supply cannot be exceeded. In a similar way, when the hob is connected and
configured to a 13/20/25Amp supply mode, the hob will limit the maximum power at
2.9/4.5/5.5kW.
If, however, the hob is connected and configured to a 32Amp power supply, all four
zones can be used on the maximum setting with boost at the same time.
To change the ECO configuration setting
1. Cut off the power supply to the hob.
2. Leave the power supply cut off for 1 minute.
3. Switch on the power supply again.
4. Follow the instructions under “To configure the hob into ECO Mode” from step
“1” onward.
NOTE: The ECO Mode Configuration can be entered only once if the power supply of
the hob
is not cut off and
the ECO mode should be set within one minute after the
power is turned on
To configure the hob into ECO Mode
1. Touch ON/OFF key to switch on the power supply. The buzzer beeps once, all
displays show “– “and “– – “.
Bekijk gratis de handleiding van Candy CI642CA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Candy |
| Model | CI642CA |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 28805 MB |
