Candy BWR 485SBL6-S handleiding
Handleiding
Je bekijkt pagina 30 van 33
11-Troubleshooting
EN
10-Troubleshooting
Many occuring problems could be solved by yourself without specific expertise. In case of
a problem please check all shown possibilities and follow below Instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
Electrical equipment should be serviced only by qualified electrical experts, because
improper repairs can cause considerable consequential damages.
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
11.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
Child lock on
Function child lock is activeted.
Function child lock is not activated.
11.2 Troubleshooting with display code
Problem Cause Solution
CLR FLTR
• Drainage error, water is not fully
drained within 6 minutes.
• Clean pump filter
• Check drain hose installation.
E2
• Lock error.
• Shut the door properly.
E4
• Water level not reached after 12
minutes.
• Drain hose is self-syphoning.
• Make sure that tap is fully opened and
water pressure is normal.
• Check drain hose installation.
E8
• Water protective level error.
• Contact the After sales service.
Lock
Door is closed because of high water level,high water temperature or spinning cycle.
End
The washing cycle is finished.The appliance shuts off automatically.
Child lock off
nd
Model has not been selected.
3 1
Pause
P rogram suspension.
F9
Logic: The communication
between the drying tempera-
ture sensor is abnormal
Cause: Drying temp sensor
failure
Check whether the wire and terminal are well connected.
Check the resistance of dry temperature sensor.
•
•
•
•
E9
• The load is attached to the cylinder • Open the door,shake off the load cloth
and put it back into the inner cylinder to
start the machine.
E5
wall.
• Drainage error.Water is not fully
drained within 1 minutes.
• Clean pump filter.
• Check drain hose installation.
Fd
Dry heating communication error.
• • Contact the after sales service.
Fb
• Water overflowed abnormally.
• Contact the after sales service.
Bekijk gratis de handleiding van Candy BWR 485SBL6-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Candy |
| Model | BWR 485SBL6-S |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5464 MB |
