Canarm SXB42CBD10300 handleiding
Handleiding
Je bekijkt pagina 5 van 16
XB, HV, HVA, HVAR, ADD, ADDR, DDS, DDP, SXB, SADD
M0112_NOV 2020 Page 5 of 8www.CANARM.COM
Canarm Ltd. - Corporate Head Office 2157 Parkedale Avenue, PO Box 367 Brockville, Ontario Canada K6V 5V6
Tel: (613) 342-5424 Fax: (613) 342-8437 hvacsales@canarm.ca www.canarm.com
Canarm Ltd. uses pillow block bearings.
• Before removing the bearings mark the positions of the fan blade, bearings and pulley on the shaft.
• Note the clearance between the fan blade and the venturi.
• Remove the pulley and fan blade from the shaft using a puller.
• Unbolt the bearings and remove the shaft and pillow blocks as one unit.
• Clean the shaft and remove any marks using a le or emery cloth then remove the bearings using a bearing
puller.
• Inspect the shaft and replace if necessary.
• Mount the new bearings on a section of the shaft that is not worn by tapping the inner ring face using a soft
mallet.
• Align the setscrews on the bearings and then tighten one setscrew on each bearing.
• Loosely install the bearings on the bearing mount.
• Rotate the shaft to nd the center of free movement.
• Install the propeller adjusting the bearing location to center the blade in the venturi.
• Tighten the bearing bolts to the proper torque rating
• Turn the propeller by hand the propeller should rotate freely with the same resistance as before the bearing
bolts were tightened.
• Tighten all setscrews to the proper torque rating
• Install pulley and adjust belt tension.
You should go through the start up steps as outlined above.
REPLACEMENT
PARTS LIST
MODELS: DDS, DDP, ADD, ADDR MODELS: XB, HV, HVA, HVAR
4
3
2
1
MOTOR 1
WELDED FAN ASSEMBLY
PROPELLER BUSHING
FAN ASSEMBLY
PROPELLER
DESCRIPTION QUANTITY
1
1
1
1
3
2
ITEM
4
DRIVEN SHEAVE BUSHING
MOTOR SHEAVE BUSHING
FAN ASSEMBLY
PILLOW BLOCK BEARINGS
3
DRIVEN SHEAVE
“V” BELTS
FAN SHAFT
PROPELLER
PROPELLER BUSHING
9
11
10
6
8
7
5
4
DESCRIPTION
MOTOR SHEAVE
ITEM
2
1
1
2
2
1
1
1
1
1
1
QUANTITY
1
1WELDED FAN ASSEMBLY
MOTOR
4
11
9
10
6
8
7
5
2
3
1
Bekijk gratis de handleiding van Canarm SXB42CBD10300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canarm |
| Model | SXB42CBD10300 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 2706 MB |
