Handleiding
Je bekijkt pagina 11 van 168
11
power cord from the device if it is not in use or if you want to start
cleaning it.
DEVICE DESCRIPTION:
Heater - look at figure 10
A. Heating hanger for towel
B. Control panel
Description of the control panel (B) - look at Figure 8
1.Power button ON/OFF. ("ON/OFF")
2.LED display
3.Timer button
4.Minus button
5. Plus button
6. "MOD" mode selection button
Description of the LED display (2) - see figure 8
AREA I: indication of operating status:
- Sun icon - power-on icon
- "R" icon - room temperature setting mode
- Icon of the letter "T" - towel rack heating mode
AREA II: temperature setting indication:
- "SET" - indicates that you are in the process of setting: the required room temperature, hanger
temperature or heating time.
- "ON" - indicates that the unit is on
- "OFF" - indicates that the device is off and goes into standby mode
AREA III: time indication - starts working when the timer button is pressed (3)
- "TIME" - indicates that you are in the process of setting the time in 24-hour format.
OPERATION
1. To turn on the unit, press the ON/OFF power button (1). To turn the unit off, press the ON/OFF power
button (1) again, in which case the word OFF will remain illuminated, indicating that the unit is in
standby mode.
2. Setting the mode
Press the mode button (6) to select between room temperature mode (letter R) and towel rack mode
(letter T), the corresponding icon will be highlighted. Then configure:
2A. TOWEL RACK TEMPERATURE SETTING (T):
If T is selected, the LED display (2) shows the surface temperature of the towel rack:
By pressing the plus button (5) or the minus button (4) you can set the temperature of the hanger in the
range: 40-70 degrees Celsius. The display will flash and go off after 5 seconds.
After 2 minutes of inactivity, the display (2) will only display the towel rack mode icons "ON" and "T",
after which the display will go into a half-lit state.
2B. ROOM TEMPERATURE SETTING (R):
If R is selected - the LED display (2) shows the current room temperature.
By pressing the plus button (5) or minus button (4) you can set the desired room temperature in the range:
0-37 degrees Celsius. The display will start flashing and turn off after 5 seconds.
Bekijk gratis de handleiding van Camry CR 7822, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Camry |
| Model | CR 7822 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 16158 MB |
