Handleiding
Je bekijkt pagina 4 van 88
4
used because that may cause fire, electrical shock or injury.
17. Never blend hot oil or fat.
21. Never blend bones, ice, coffee or peanuts.
19. Do not cover vents.
25. When cleaning device, do not use aggressive detergent, it may damage the cover of
the device.
18. Keep fingers away from moving parts.
1.1. Power button 1.2. Motor base 1.3.Cutting blades
BLENDER
6. To turn on the blender, turn the jar (1.6) to the right on the motor base (1.2). Check if it fits properly. Place the lid appropriately (1.5) at
the top.
NOTE: The quantity of ice cubes in the jar (1.6) should be about 10 pieces, and size of the ice cube should not exceed 30*23*23mm.
The ice cubes not larger than 15 x 15 mm are the best for blending. When crushing ice, press and release the power button (1.1) 5
times. Then press for longer time. Don't crush ice when the jar (1.6) has no water inside.
22. When changing accessories, be sure that device is NOT connected to electricity.
5. Connect the power cord to a power socket.
NOTE: The device is intended for soft fruits. Before blending, first cut the fruits into pieces. Don't use hard fruits.
20. Do not use with wet hands.
24. Before first use, clean the device.
3.1 Cooling attachment 3.2 Cooling attachment cover
1. Ensure that all blender elements are clean.
2. Attach the cutting blades (1.3) to the jar (1.6) by screwing them at the bottom of the jar.
DEVICE DESCRIPTION:
3. Place the jar (1.6) with the attached cutting blades (1.3) on the motor base (1.2).
5.1. Grinder cup 5.2 Grinder blades
1.4 Measurement cup (50ml) 1.5 Lid 1.6. Jar
23. Short-time operating: Use the appliance for no longer than 2 minutes and leave it
cooled down completely before using again about 4 minutes.
16. Do not use the appliance for other than its intended use. The blades are very sharp!
Care is needed when handling them
2.1 Bottle lid 2.2 Bottle
USING THE DEVICE
4. Place the ingredients in the jar (1.6). All the ingredients must be filled below max level marked on the jar (1.6).
7. Press and hold the power button (1.1) to blend. Do not use the blender for longer than 2 minutes of continuous operation time.
4. Citrus juicer attachment
4. Connect the power cord to a power socket.
3. Once the water in the cooling attachment (3.1) freezes place it into the bottle (2.2) and
SPORT BOTTLE
2. Attach the cutting blades (1.3) to the bottle (2.2) by screwing them onto the bottle top.
6. Remove the power cord from the power socket.
1. Place the ingredients in the bottle (2.2). All the ingredients must be filled below max level marked on the bottle.
2. Keep the cooling attachment (3.1) in the freezer until the water freezes.
put the bottle lid on (2.1).
5. Press and hold the power button (1.1) to blend. Do not use the blender for longer than 2 minutes of continuous operation time.
3. Place the bottle (2.2) with the attached cutting blades (1.3) on the motor base (1.2). Check if it fits properly.
9. Remove the jar (1.6) from the motor base (1.2).
8. Remove the power cord from the power socket.
7. Remove the bottle (2.2) from the motor base (1.2). Unscrew the cutting blades (1.3) and put the bottle lid on (3.1).
COOLING ATTACHMENT
1. Fill the cooling attachment (3.1) with water up to the maximum level indicator.
Bekijk gratis de handleiding van Camry CR 4086, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Camry |
| Model | CR 4086 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 8146 MB |