Cameo UNICON handleiding
Handleiding
Je bekijkt pagina 17 van 160
17
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
EZ REMOTE CONTROL
Cameo spotlights with EZ remote function can be controlled by Cameo UNICON via CCT, HSI, RGB
or GEL. In the spotlight, activate the EZ Remote function and give the spotlight one of eight IDs
(ID1 - ID8). Connect UNICON and spotlights using a DMX cable. By assigning different unit IDs, up
to eight spotlights (or spotlight groups) can be controlled separately via UNICON. Alternatively, the
control signals can be output to all eight IDs in parallel (Fixture ALL). In the UNICON main menu,
select DMX Control, confirm the selection, then select EZ Remote and confirm again. Now select
Fixture ID (see no. 1, ID is displayed in blue), confirm, select the same ID previously configured
in the corresponding spotlight and confirm again. Now select the desired operating mode under
Mode and confirm the selection (see No. 2, CCT/HSI/RGB/GEL)
21
CONTROL VIA CCT
Under Dimmer, set the brightness from 0% to 100%, under CCT, set the colour temperature from
Warm White to 2700K, from 2700K to 6500K and from 6500K to Cold Daylight, and under Tint, set
the tint from -10 to +10.
EZ Remote Help
Fixture ID1 Mode : CCT
Dimmer 100%
CCT 3200K
Tint 0.0
Bekijk gratis de handleiding van Cameo UNICON, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cameo |
| Model | UNICON |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 13863 MB |
