Cameo iDMX T3 handleiding
Handleiding
Je bekijkt pagina 4 van 32
ENGLISH
4
SAFETY INSTRUCTIONS
HAZARD:
1. Do not open the device and do not perform any modifications.
2. If your device no longer functions properly, if liquids or objects get inside it or if it has been damaged in any other way,
switch it off immediately and disconnect it from the mains. The device may be repaired only by authorised repair techni-
cians.
3. For devices of protection class 1, the protective conductor must be connected correctly. Never disconnect the protective
conductor. Devices of protection class 2 do not have a protective conductor.
4. Ensure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the device fuse.
WARNING:
1. The device must not be put into operation if it shows obvious signs of damage.
2. The device may only be installed in a voltage-free state.
3. If the power cord of the device is damaged, the device must not be used.
4. Permanently connected mains cables may only be replaced by a qualified person.
CAUTION:
1. Do not put the device into operation immediately if it has been exposed to extreme temperature fluctuations (for example,
after transportation). Moisture and condensation can damage the device. Do not switch on the device until it has reached
room temperature.
2. Ensure that the voltage and frequency of the mains supply match the values specified on the device. If the device has a
voltage selector switch, do not connect the device until it has been set correctly. Use only suitable power cables.
3. To disconnect the device from the mains on all poles, it is not sufficient to press the on/off switch on the device.
4. Make sure that the fuse used corresponds to the type printed on the device.
5. Ensure that suitable measures have been taken against overvoltage (e.g. lightning strikes).
6. Observe the specified maximum output current on devices with a Power Out connection. Ensure that the total current
consumption of all connected devices does not exceed the specified value.
7. Replace pluggable mains cables with original cables only.
HAZARD
1. Choking hazard! Plastic bags and small parts must be kept out of reach of persons (including children) with reduced physi-
cal, sensory or mental capabilities.
2. Risk of falling! Make sure that the device is securely installed and will not fall down. Only use suitable stands or mountings
(particularly for fixed installations). Make sure that accessories are correctly installed and secured. Ensure that applicable
safety regulations are observed.
WARNING:
1. Use the device in the prescribed manner only.
2. Operate the device using only accessories of the type recommended and supplied by the manufacturer.
3. Observe safety regulations applicable in your country during installation.
4. After connecting the device, ensure that all cables are routed so as to avoid damage or accidents, such as from tripping.
5. Always observe the specified minimum distance to normally flammable materials! Unless explicitly stated, the minimum
distance is 0.3 m.
Bekijk gratis de handleiding van Cameo iDMX T3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cameo |
| Model | iDMX T3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3097 MB |
