CAME-TV NANO handleiding
Handleiding
Je bekijkt pagina 17 van 24
Battery Compartment
Pairing Instructions
CAME-NANO
The product comes pre-paired, allowing immediate use upon switching
on the device without any additional steps. Pairing becomes necessary
only if a remote loses connection with the master.
1 Ensure that both the Master and all Remote devices are powered on.
When the Master enters the pairing state, any remotes not powered
on will be cleared from the set.
2 Simultaneously press the "Volume Up" and "Volume Down" buttons
on the Master until the green LED indicator begins ashing quickly
and the sound of "pairing" is heard, indicating it has entered the pairing
state. And then activate the pairing mode of remote Nano, it follows
the same pairing activation steps by simultaneously pressing the
volume up and down buttons. Start by pairing one remote, once it
says “your headset is connected” then proceed to pair the remaining lost
remotes one by one in sequence.
3 The master will automatically exit the pairing state and the LED
will become solid once it is fully connected with all 4 remotes.
If there are fewer than 4 remotes, you can manually exit the
pairing state by pressing the master Nano "Mute On/off "button.
If you want to pair a remote with a new master, be sure to turn off the
previous master that was paired with that remote before initiating
the new pairing process.
Pairing Steps
16
Bekijk gratis de handleiding van CAME-TV NANO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CAME-TV |
| Model | NANO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1604 MB |
