CAME-TV KUMINIK8 handleiding
Handleiding
Je bekijkt pagina 14 van 24
13
CAME-KUMINIK8
KUMINIK8 with HUB Set
The Hub incorporates two Masters and one built-in Remote.
Each Master within the Hub can accommodate up to 3 Remotes.
With this conguration, a single hub enables connections for up to
10 headsets within a single system, while two hubs can facilitate
connections for up to 15 headsets.
(Please refer to the pairing diagram above for further guidance.)
The hub has a micro USB port to power/charge the unit via
5V DC with a USB power supply or power bank.
When power is connected it can run directly without batteries and
also charge when batteries are installed. The Hub can run alone
on batteries and with one installed run time is about 8-10 hours
and with two batteries installed, the run time increases to about 15-18 hours.
INPUT OFF ON
USB Function
1. Direct Power Supply to
the HUB
2. Charge batteries in the
battery compartment.
3.5mm TRRS audio jack It
adheres to the United States
CTIA standard.
If your equipment follows the
OMTP standard,
you will need to use a
conversion cable.
USB 5V Switch button
3.5mm TRRS
Bekijk gratis de handleiding van CAME-TV KUMINIK8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CAME-TV |
| Model | KUMINIK8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1554 MB |
