Cambro PCU1000 handleiding
Handleiding
Je bekijkt pagina 9 van 12
9
1. Remove the #10 Pin-in-Torx screw from the Black Rubber retainer with a T-25 PIT driver bit.
2. Slide the column out of the compartment and verify the rail positions at the desired positions for your application.
3. Install two stainless steel rods (see image) through the small holes in each of the lower tabs of the rails assembled to the column.
Additional rods can be purchased and installed in the center positions for added security.
4. Verify that each rail tab has a rod threaded through its hole.
5. Slide the completed assembly back into the compartment and re-install the screw back into the original hole.
STEP 2
STEP 3
STEP 5
STEP 4
Step 1 - Remove the #8 Pin-in-Torx screw from
the column with a T-20 PIT driver bit.
Step 2 - Slide the column out of the compartment
and verify the rail positions at the desired
positions for your application.
Step 3 - Install two stainless steel rods (see image)
through the small holes in each of the
lower tabs of the rails assembled to the column.
Additional rods can be purchased and installed
in the center positions for added security.
Step 4 - Verify that each rail tab gets the rod through
the hole.
Step 5 - Slide the Completed assembly back into the
compartment and re-install the screw back into the
original hole.
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
CMBPSP Assembly view
REV
CMBPSP Assembly view
VIII. Instructions for Security Package (S) Models
ERP1 Probe Error (check wiring or replace probe)
Eri Internal Parameter Error (factory default programming)
ALH High Temperature Alarm
ALL Low Temperature Alarm
ooo Open Probe Error
--- Short Circuited Probe Error
VII. Troubleshooting Guide (continued)
In normal operation, the probe temperature will be displayed. The display
blinks when waiting for a parameter to be saved or when there is an error
saving a parameter to memory. The following messages can also appear:
Please contact service if problem persists.
Bekijk gratis de handleiding van Cambro PCU1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambro |
| Model | PCU1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2688 MB |
