Cambium Networks cnWave 60 handleiding
Handleiding
Je bekijkt pagina 28 van 261
Product Description 28
l
Packet Error Ratio (PER),
l
SNR,
l
local measurements of successful and unsuccessful frame transmissions (for example, count of frames
Acknowledged (ACKed) or Not ACKed).
Figure 10:
Adjusting links
Start from MCS2, adjust based on signal quality, when the session is idle, fall back to MCS-9 or any highest MCS
achieved below MCS-9.
Synchronization
Synchronization is used to control the transmit and receive signals to prevent self-interference. Radios assigned with
the same polarity will be transmitting and receiving at the same time. There are two types of polarities:
l
Odd (if Odd nodes are Tx)
l
Even (if Even nodes are Rx)
Figure 11:
Odd and even polarities
The MAC synchronizes its timers to an external, accurate time source, such as GPS or IEEE 1588. A timing pulse that
resets the Timing Synchronization Function (TSF) on the DN is repeated once every second. This timing pulse occurs
exactly at the turn of each second.
Bekijk gratis de handleiding van Cambium Networks cnWave 60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambium Networks |
| Model | cnWave 60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 58919 MB |
