Cambium Networks cnReach N500 handleiding
Handleiding
Je bekijkt pagina 90 van 253
cnReach N500 User Guide System Configuration
phn-4980_001v004 August 2019)
2-57
Enter all the configuration parameters and hit the “Save/Commit Module Settings” button.
The example above shows a wire replacement configuration that takes dry contact input from IO5 of
192.168.0.3 and generate analog output at 192.168.0.4 on IO1.
Meanings for each field in the wire-replacement
configuration
Name: Name of the wire, you can enter any character strings except punctuations.
Enable/Disable: A wire can be enabled or disabled
Description: any description you want to provide about the wire
Refresh Time: how often the wire replacement module will try to poll the Modbus source, and write to
the Modbus destination
Souce: Source IP address, TCP port number you want to poll from, also, which I/O pin and what I/O
information you are polling for from the source unit.
Destination:Destination IP address, TCP TCP port number you want to poll from, also, which I/O pin and
what I/O update you want to trigger based on the source input.
Slope and offset: Slope and offset allow you to scale various units to others,
Y (output) = slope * X (input) + offset.
Bekijk gratis de handleiding van Cambium Networks cnReach N500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambium Networks |
| Model | cnReach N500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 43613 MB |
