Cambium Networks cnReach N500 Handleiding (253 Pagina's)

Handleiding

/ 253

Je bekijkt pagina 121 van 253

cnReach N500 User Guide System Configuration

phn-4980_001v004 August 2019)

2-88

Attention

Resetting to factory defaults modifies both the Network and Radio settings, making it

possible to lose connectivity to the device via the RF Link and/or Ethernet Port.

Password changes are NOT reset to default.

The default Network/Interfaces configuration is Bridged Mode with a VLAN1 IP address of 192.168.0.3.

Current boot partition allows the radio to boot from one of two boot partitions. This allows new

firmware to be installed on one partition while keeping the previous version on the other. Note that the

firmware update under management/files applies the new firmware to the inactive partition and then

switches the active partion and reboots. To install firmware to both partitions, the upgrade should be

applied twice.

Download Debug Logs may be requested by Cambium support in order to get more detailed logs

useful to the development engineering team. There isn’t any useful information for the end user to

collect with these logs.

Management/Advanced Settings

The advanced settings page includes the ability to enable/disable https web interface. By default the

radio uses http.

The discovery enabled button is for customer support use only.

Network services allow the network administrator to enable/disable access to the command-line via

telnet and/or ssh as well as change the port number where these services will be located.

Time Setting

Time setting allows the operator to use NTP servers to provide day time to the radio.

/ 253

Bekijk gratis de handleiding van Cambium Networks cnReach N500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.