Cambium Networks cnReach N500 Handleiding (253 Pagina's)

Handleiding

/ 253

Je bekijkt pagina 106 van 253

cnReach N500 User Guide System Configuration

phn-4980_001v004 August 2019)

2-73

Diagnostics/Spectrum Analyzer

The spectrum analyzer feature is designed to assist in diagnosing channel interference issues and to

understand the noise floor in a given area that can be detected by the radio and its antenna.

It can be a useful tool in diagnosing issues and understanding the impact noise may be having on link

performance. The spectrum analyzer provide 4 different data visualizations based on real-time

measurements taken by the radio.

Attention

While the spectrum analyzer is active, the normal payload traffic and the link is DOWN. No

traffic will pass until the spectrum analyzer is turned off again. This also implies that you

can only run the spectrum analyzer on the AP side of a wireless link or when directly

connected to an EP. In the case where a user accidentally runs the spectrum analyzer on

an EP over a wireless link, the link will drop and communications will be lost to the end

point. After a timeout period the EP will drop out of spectrum analyzer mode and return

to the active payload connection.

/ 253

Bekijk gratis de handleiding van Cambium Networks cnReach N500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.