Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 95 van 320

L2 Features 95

l

Revision

l

Date of manufacturing

Limitations

l

The EX2010 model can only display information for SFP, while the EX2028 model supports SFP+.

l

The EX1028 and EX1028-P models only support SFP transceivers.

l

The EX1010 and EX1010-P models only support SFP transceivers.

Prerequisites

l

Insert a transceiver in your cnMatrix switch.

Link-Transitions Count

Managing Link-Transitions Count

Feature Overview

The Link-Transitions Count feature provides a way for the switch to count the number of link transition

events per-port. The feature shows the number of link transition events on a per-port basis, for all ports

available and the time stamp of the last transition.

Note

The link-transitions counters can be displayed via CLI, Web, and SNMP.

Attention

Link-Transitions Count feature is supported starting with cnMatrix release 4.0.1.

Standards

N/A

Limitations

Last transition date and time field have an error of +/- one second.

Default Values

l

The feature is enabled by default.

l

The counters sum up all the link Up and link Down transitions on each port, for all physical ports.

The feature does not count link Up/Down events for VLAN interfaces or OOB port.

l

The counters start from zero at boot time and reset to zero on each reboot.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.