Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 93 van 320

L2 Features 93

l

This feature requires the port to be down while the setting is changed.

l

This feature only works in full duplex mode.

l

Flow control can be either disabled or enabled on both RX and TX, not separately on RX or TX.

Default Values

l

By default, auto-negotiation is enabled on all ports. If the compatible link partner advertises flow

control capability, flow control will be operationally enabled.

How to Enable and Configure Flow Control in CLI Interface

1. Enter configure terminal into thefield. Press the Enterkey.

2. Enter interface gigabitethernet 0/1 into the field to select an interface to be configured. Press the

Enterkey.

3. Enter no negotiation into the field to disable auto-negotiation on the interface. Press the Enterkey.

4. Enter duplex full into the field to configure the duplicity of the interface. Press the Enterkey.

5. Enter shutdown into the field to disable a physical interface. Press the Enterkey.

6. Enter flowcontrol on into the field to enable flow control. Press the Enterkey.

7. Enter no shutdown into the field to enable a physical interface. Press the Enterkey.

8. Enter end into the field. Press the Enterkey.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.