Cambium Networks cnMatrix EX2028 handleiding

320 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 86 van 320
L2 Features 86
How to Enable and Configure Speed in CLI Interface
1. Enter configure terminal into the field. Press the Enterkey.
2. Enter interface gigabitethernet 0/1 into the fieldto select an interface to be configured. Press the
Enterkey.
3. Enter no negotiation into the field to disable auto-negotiation on the interface. Press the Enter key.
Note
Speedcannot be set if auto-negotiation is enabled.
4. Enter speed 1000 into the field to set the speed of the interface. Press the Enterkey.
5. Enter end into the field. Press the Enterkey.
6. Enter show interface gigabitethernet 0/1 into the field to display interface status and
configurations (verify if speed has been correctly set on the configured interface). Press the
Enterkey.

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCambium Networks
ModelcnMatrix EX2028
CategorieNiet gecategoriseerd
TaalNederlands
Grootte32421 MB

Caratteristiche Prodotto

Kleur van het productGrijs
Gewicht2770 g
Breedte440 mm
Diepte209 mm
Hoogte44 mm