Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 69 van 320

L2 Features 69

How to Enable Location ID (Starting with version 2.1)

1. Type the configure terminal command into theterminal. Press the Enterkey.

2. Type the interface gigabitethernet 0/1 command into the terminal to select an interface to be

configured. Press the Enter key.

3. Type the lldp med-tlv-select location-id command into the terminal to select LLDP-MED TLV and

Location Identification TLV related configuration. Press the Enter key.

4. Type the lldp med-location elin-location location-id 4085550101 command into the terminal to

configure the Emergency Location Information Number (ELIN) location subtype information

advertised by the endpoint. Press the Enter key.

5. Type the end command into theterminal to go back to the Privileged EXEC mode. Press the Enter

key.

6. Type the show lldp local gigabitethernet 0/1 command into the terminal to display the current

switch information that will be used to populate outbound LLDP advertisements for a specific

interface (verify if the above configurations were applied). Press the Enter key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.