Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 67 van 320

L2 Features 67

4. Type the exit command into the terminal to go back to the global configuration mode. Press the

Enterkey.

5. Type the interface gigabit 0/1 command intoterminal to select an interface to be configured. Press

the Enterkey.

6. Type the lldp med-tlv-select network-policy command into the terminal to enable LLDP-MED TLV

transmission on a given switch port. Press the Enterkey.

7. Type the lldp med-app-type voice vlan vlan-id 14 priority 0 dscp 46 command into the terminal to

set the Network-policy TLV as Voice Application, configure the priority value for the selected

VLAN, and set the DSCP value. Press the Enter key.

8. Type the end command into the terminal to go back to the Privileged EXEC mode. Press the Enter

key.

9. Type the show lld local gigabit 0/1 command into terminal to display the current switch

informationthat will be used to populate outboundLLDP advertisements for a specificinterface

(verify if the above configurations were applied). Press the Enter key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.