Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 53 van 320

L2 Features 53

Configuring PVRST in CLI Interface (Example)

1. Type the configure terminal command into the terminal. Press the Enterkey.

2. Type the vlan 10 command into theterminalto configure VLAN 10. Press the Enterkey.

3. Type the ports add gigabitethernet 0/1 command into theterminal. Press the Enterkey.

4. Type the ports add gigabitethernet 0/2 command into theterminal. Press the Enterkey.

5. Type the exit command into the terminal to go back to the global configuration mode. Press the

Enter key

6. Type the vlan 20 command into theterminal to create VLAN 20. Press the Enterkey.

7. Type the ports add gigabitethernet 0/1 command into theterminal. Press the Enter key.

8. Type the ports add gigabitethernet 0/2 command into the terminal. Press the Enterkey.

9. Type the exit command into the terminal to go back to the global configuration mode. Press the

Enterkey

10. Type the spanning-tree mode pvrst command into theterminal to enable PVRST. Press the

Enterkey.

11. Type the spanning-tree vlan 10 root primary command into theterminal to configure the root

switch for VLAN 10. Press the Enterkey.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.