Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 281 van 320

Security Features 281

5. Type the radius-server host 10.2.109.10 key cambium123 primary command into the terminal to

specify the RADIUS query parameters. Press the Enter key.

6. Type the int gigabitethernet 0/2 command into the terminal to select the interface to be

configured. Press the Enter key.

7. Type the dot1x host-mode multi-host command into the terminal to configure port authentication

mode. Press the Enter key.

8. Type the dot1x port-control auto command into the terminal to configure the authentication port

control. Press the Enter key.

9. Type the dot1x mac-auth-bypass command into the terminal to configure the authentication of

mac address based clients Press the Enter key. (Starting with release 4.1)

10. Type the dot1x reauthentication command into the terminal to enable the re-authentication

process – default value is 3600 seconds. Press the Enter key.

11. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enter key.

12. Type the show dot1x interface gigabitethernet 0/2 command into the terminal to display the

information of the 802.1X authentication for the gi0/2 interface in Multi-Host mode. Press the

Enter key.

13. Type the show dot1x mac-info command into the terminal to display the information of the 802.1X

authentication for the Single-Host mode. Press the Enter key.

14. Type the show dot1x command into the terminal to display the global 802.1x settings. Press the

Enter key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.