Cambium Networks cnMatrix EX2028 handleiding

320 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 267 van 320
Security Features 267
Troubleshooting access lists
Check if an ACL is active or not:
l
Run the command show access-lists and identify the desired ACL.
l
Identify the value of the Status field.
l
If the value of the Status field is Inactive then:
l
Identify the value of the In Port List and Out Port List fields. If both are NIL, the ACL is
inactive, as it has not been applied on any port.
l
Run the command show access-lists resources.
l
Check if the number of hardware policies reached the maximum. Once the number of
hardware policies in use reaches the maximum, new rules will be marked as inactive.
Static MAC
Managing Static MAC
The switch allows the user to configure a static MAC address and assign it to a specific VLANID and a
specific port. The MAC addresses configured in this manner are immune to automatic MAC address aging
and migration.
Normally, with a dynamically learned MAC address, traffic that enters the switch through a different port
than the one currently present in the mac-address-table will be forwarded, and the entry’s port will be
migrated to the new value.
Traffic that enters the switch through a port and has a source MAC address that is statically configured to
a different port will be dropped, and its source address will not be migrated.
Standards
l
IEEE 802.1q.
Scaling Numbers
l
256 static MAC addresses can be configured on the switch.
Limitations
l
Only unicast MAC addresses can be configured using this switch.
l
A valid entry in the mac-address-table is a MAC or VLAN id pair, and assigning the same pair to
more than one port will cause the switch to retain only the value configured last.
Default Values
l
The status of the static unicast entry is set to permanent by default.
Prerequisites
l
The VLAN to which the MAC address is assigned must be already created at the time the static
MAC is configured, or an error message will be displayed.
SNMP

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCambium Networks
ModelcnMatrix EX2028
CategorieNiet gecategoriseerd
TaalNederlands
Grootte32421 MB

Caratteristiche Prodotto

Kleur van het productGrijs
Gewicht2770 g
Breedte440 mm
Diepte209 mm
Hoogte44 mm