Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 259 van 320

Security Features 259

How to Enable and Configure DHCP Snooping in CLI Interface

1. Type the config terminal command into theterminal. Press the Enter key.

2. Type the ip dhcp snooping command into the terminal to enable globally the L2 DHCP

Snoopingfeature in the system. Press the Enter key.

3. Type the ip dhcp snooping vlan 1 command into the terminal to enable L2 DHCP Snooping on the

VLAN Interface. Press the Enter key.

4. Type the interface gigabitethernet 0/7 command into the terminal to select the interface to be

configured. Press the Enter key.

5. Type the ip dhcp snooping trust command into the terminal to configure the interface as a trusted

port. Press the Enter key.

6. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enter key.

7. Type the show ip binding dhcp command into the terminal to display the host binding information.

Press the Enterkey.

For more information, see DHCP Snooping Parameters and Commands.

Troubleshooting DHCP Snooping

Useful commands for troubleshooting:

l

For information regarding packet statistics:

cnMatrix#show ip dhcp snooping vlan vlan-id

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.