Cambium Networks cnMatrix EX2028 handleiding
Handleiding
Je bekijkt pagina 241 van 320
Management Features 241
How to Enable and Configure CPU Monitor
1. Type the show cpu-monitor config command into the terminal to see the initial config. Press the
Enter key.
2. Type the configure terminal command into the terminal. Press the Enter key.
3. Type cpu-monitor buffer-size 20 to set another buffer size. Press the Enter key.
4. Type cpu-monitor packet-size 128 to set the maximum size which the packets are saved to the
buffer. Press the Enter key.
5. Type cpu-monitor packets-limit 50 to set the maximum number of packets that will be saved in
the buffer. Press the Enter key.
6. Type Exit command to go back to the global configuration mode. Press the Enter key.
7. Type cpu-monitor start command to start capturing packets process. Press the Enter key.
8. Type cpu-monitor stop command at any time stop the capturing process. Press the Enter key.
Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambium Networks |
| Model | cnMatrix EX2028 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 32421 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 2770 g |
| Breedte | 440 mm |
| Diepte | 209 mm |
| Hoogte | 44 mm |
