Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 214 van 320

Management Features 214

l

Before configuring a Cambium device to send syslog messages, the right time and date should be

configured. When using NTP, a correct and synchronized system clock on all devices within the

network is guaranteed.

l

Before configuring a Cambium device to send syslog messages, the device should be able to reach

the external device on which the messages will be stored.

How to Enable and Configure Syslog in CLI Interface

1. Type the config terminal command into theterminal. Press theEnter key.

2. Type the logging on command into the terminal to enable the syslog server. Press theEnter key.

3. Type the logging facility local0 command into the terminal. Press the Enter key.

4. Type the logging 128 ipv4 10.0.0.1 port 514 command into the terminal to add an entry into the

logging-server table. Press the Enter key.

5. Type the logging 129 ipv4 10.0.0.1 port 514 command into the terminal. Press the Enter key.

6. Type the logging 130 ipv4 10.0.0.1 port 514 command into the terminal. Press the Enterkey.

7. Type the logging 131 ipv4 10.0.0.1 port 514 command into the terminal. Press the Enter key.

8. Type the logging 132 ipv4 10.0.0.1 port 514 command into the terminal. Press theEnter key.

9. Type the logging 133 ip v4 10.0.0.1 port 514 command into the terminal. Press the Enterkey.

10. Type the logging 134 ipv4 10.0.0.1 port 514 command into the terminal. Press the Enter key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.