Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 205 van 320

Management Features 205

Configuring DHCP Address Pool

1. Type the configure terminal command into the terminal. Press the Enter key.

2. Type the service dhcp-server command into theterminalto enable the DHCP Server feature. Press

the Enterkey

3. Type the ip dhcp pool 1 vlan1_clients command into theterminal to create a name for the DHCP

server address pool and to go to the dhcp configuration mode. Press the Enterkey.

4. Type the network 10.100.200.100 255.255.255.0 10.100.200.150 command into the terminal to

specify the subnet network mask. Press the Enterkey.

5. Type the default-router 10.100.200.1 command into the terminal to specify the IP address of the

default router for a DHCP client. Press the Enterkey

6. Type the dns-server 10.100.200.10 10.100.200.11 command into the terminal to specify the IP

address of a DNS server that is available to a DHCP client. Press the Enterkey

7. Type the ntp-server 10.100.200.20 command into the terminal to specify the IP address of a NTP

server that is available to a DHCP client.Press the Enter key.

8. Type the lease 100 command into the terminal to specify the duration of the lease.Press the Enter

key.

Note

The default duration of the lease: one day.

9. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enterkey.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.