Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 192 van 320

L3 Features 192

Press the Enter key.

SWITCH C

1. Type the configure terminal command into thefield. Press the Enter key.

2. Type the interface gigabitethernet 0/4 command into the terminal. Press the Enter key.

3. Type the shutdown command into theterminal. Press the Enter key.

4. Type the no switchport command into theterminal. Press the Enter key.

5. Type the ip address 192.168.2.2 255.255.255.0 command into theterminal. Press the Enter key.

6. Type the no shutdown command into theterminal. Press the Enter key.

7. Type the exit command into theterminal to go back to the configuration mode. Press the Enter

key.

8. Type the router ospf command into the terminal. Press the Enter key.

9. Type the router-id 3.3.3.3 command into the terminal. Press the Enter key.

10. Type the network 192.168.2.2 255.255.255.0 area 0.0.0.1 command into theterminal. Press the

Enter key.

11. Type the end command into theterminal. Press the Enter key.

12. Type the show ip ospf neighbor command into the terminal (in switch A and switch C) to display

the OSPF neighbor information list (verify the adjacency on switch A and C, between switchA and

switchC on area 1). Press the Enter key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.